Coconut shell charcoal grades explained

Grades come down to four numbers on a proximate analysis: fixed carbon, ash, volatile matter and moisture. A good lot runs 70 to 80% fixed carbon, with ash under 3 to 4%, volatiles under 15 to 20% and moisture under 8 to 10%.

Keraline teamUpdated 29 Oct 2026 · 7 min read
On this page
  1. How is coconut shell charcoal made?
  2. What do the four numbers mean?
  3. What does each buyer need?
  4. What size and hardness should you ask for?
  5. How do you read the lab report?
  6. How is it packed and shipped?
  7. What should you specify when you order?

Coconut shell charcoal is bought by activated carbon plants, briquette makers and metallurgical users, and those three buyers want measurably different material. The trade calls all of it "high quality", which tells you nothing. A short proximate analysis separates the grades, and once you can read it the market gets much easier to navigate.

How is coconut shell charcoal made?

Cleaned, de-fibred shells are carbonised in kilns, pits or drums. Heat drives off moisture and volatile compounds, leaving mostly carbon. Yield is roughly a quarter to a third of the raw shell weight, which is why shell prices and charcoal prices move together. How carefully the burn is controlled decides how consistent the lot is: an uncontrolled burn leaves under-carbonised pockets with high volatiles beside over-burnt, ashy material.

What do the four numbers mean?

A proximate analysis reports four values that together account for the whole sample.

  • Fixed carbon

    Typical good lot
    70 to 80%
    What it means
    The carbon left after volatiles and ash. Higher is better for almost every use
  • Ash

    Typical good lot
    under 3 to 4%
    What it means
    Inorganic residue. High ash means dirt in the raw shells or over-burning
  • Volatile matter

    Typical good lot
    under 15 to 20%
    What it means
    Unburnt compounds. High volatiles mean under-carbonised material
  • Moisture

    Typical good lot
    under 8 to 10%
    What it means
    Water. Charcoal picks it up in humid storage

As received, or dry basis?

The same lot looks better on a dry basis, because the moisture is left out of the calculation. Suppliers are not always clear about which one they quoted, so ask.

What does each buyer need?

Activated carbon plants

The most demanding buyer. They want high fixed carbon, low ash and, above all, consistency: an activation line is tuned to a feedstock, and a lot that swings between 68% and 78% fixed carbon makes carbon of varying pore structure. Hard, dense lumps matter, because brittle material breaks into fines during handling and activation.

Shisha and barbecue briquette makers

Ash colour and smell matter more here, because the end user sees and smells the product. Fines are fine, since the material is ground and pressed again anyway, so this buyer can often take a grade an activated carbon plant would reject, at a lower price.

Metallurgical and fuel users

Calorific value and low ash lead. Good coconut shell charcoal runs around 6,500 to 7,200 kcal/kg, comfortably above most wood charcoal, which is why it sells at a premium as a fuel.

What size and hardness should you ask for?

Lump charcoal is normally traded at 20 to 80 mm, with granular and fines sold as separate grades. Ask two more things: what share of fines the lot may carry, and how the material holds up to handling. Charcoal that arrives as half fines has failed its specification, however good the analysis was at loading.

How do you read the lab report?

  • Confirm the standard used. ASTM D1762 is the common method for charcoal proximate analysis.
  • Confirm as received or dry basis, as above.
  • Check the sampling. A composite sample drawn across the lot means more than one drawn from a single bag.
  • Match the date to the shipment. An analysis from an earlier production run tells you about that run, not yours.
  • For larger orders, arrange third-party inspection at loading rather than relying on the producer's own certificate.

How is it packed and shipped?

  • Packing

    Typical
    25 to 50 kg PP or jute bags, or 500 to 1,000 kg jumbo bags
  • 20 ft container

    Typical
    about 14 to 16 t
  • 40 ft high cube

    Typical
    about 24 to 26 t
  • Storage

    Typical
    Dry and ventilated: charcoal takes up moisture from humid air

Check the shipping class early

Charcoal can be classed as a self-heating solid under UN 1361 for sea freight, and many carriers ask for a self-heating test report or an exemption certificate before they take a booking. Settle this with your forwarder early: it is a common cause of delayed first shipments.

What should you specify when you order?

  1. 1.Fixed carbon minimum, and whether it is as received or dry basis
  2. 2.Ash and volatile matter maximums
  3. 3.Moisture maximum at the time of loading
  4. 4.Lump size range and the most fines you will accept
  5. 5.Packing, and whether bags are to be palletised
  6. 6.Inspection: producer certificate, third-party at loading, or both
  7. 7.Destination port, delivery term, and who arranges the UN 1361 paperwork

Questions buyers ask

What fixed carbon percentage is good for coconut shell charcoal?

70 to 80% is the normal range for a well-carbonised lot, with 70 to 75% typical of standard export grade. Consistency between shipments matters as much as the headline number, especially for activated carbon.

Why does ash content matter in charcoal?

Ash is inorganic residue that adds nothing. High ash usually means sand and soil came in with the raw shells, or the burn ran too hot. For activated carbon it lowers yield and quality; for shisha it leaves residue the end user notices.

Is coconut shell charcoal dangerous goods for shipping?

It can be. Charcoal may be classed under UN 1361 as a self-heating solid, and many shipping lines want a self-heating test report or an exemption certificate before accepting the booking. Confirm it with your forwarder before the container is fixed.

What is the difference between lump charcoal and briquettes?

Lump charcoal is carbonised shell in its natural broken form. Briquettes are made by grinding charcoal, mixing it with a binder such as starch, and pressing it into shape. Briquette makers buy lump or fines as their raw material.

Where can I buy coconut shell charcoal from India?

Keraline Exports supplies coconut shell charcoal from Kerala, from a few bags within India to full containers for export. Send the fixed carbon, ash and size you need for a quote.

Buying coconut shell charcoal?

We supply coconut shell charcoal from Kerala, from a few bags within India to full containers for export. Tell us the fixed carbon, ash and size you need, and we quote it.

Containers for importLump, granular or fines, in bags or jumbo bags, for export.Get a bulk quote

More from the blog